10/5/2023 0 Comments Make a ground isolator![]() But after spending 200€ on headphones and having a phoebus (which, beside all that gamer stuff, has quite good audio output) i dont really want to have the risk of sacrificing anything in regards of speaker sound quality.īut you might be on the right track here. I cant tell, whether im loosing much quality (havent tested it too much though). Im a lil clueless to be honest and i really hope you guys can help me =)Ĭlick to expand.Let me clarify: I dont really know whether i loose quality (The sound is just a little bit quieter). My first thought was, that there is a difference between how the microphone and speaker jacks work, but both 3.5mm jacks of the Y-Cable look completely identical. The ground loop isolator cut the headphone volume by about 20 (just guessing, havent measured anything) but I had plenty of room to turn up my amp to account for that and still am only at like 60 output volume. It just doesnt work and my voice does not pass the isolator. So my plan was to just plug my microphone (because i dont mind some sacrifices in mic-quality) into this loop isolator and go from there to the line-in of my onboard sound card.īut for some reason, no signal reaches my computer. But I think i sacrifice quite some audio quality, if i have this thing for my speaker signal. If i my speaker cable into this thing and from there go to the Line-Out of my pphoebus, all whine is gone and the loop is fixed. Now here comes my problem: When i plug the speaker cable into my Phoebus and the microphone cable into the line in of my onboard sound card, i hear quite much whine in my speakers because i create a gound loop. ![]() Sadly the Line-In of that sound card suffers a great amount of coil whine so im forced to plug my microphone into my onboard sound card. Everything is 3.5mm.Īdditionally i use a sound card in my computer (Asus phoebus). Bus side isolator: It directly connects to the main bus. So I've got a Philips Fidelio X2 together with a V-Moda BoomPro microphone.Īt the end of the cable i use the Y-Cable (which came with the mic) to split the speaker/microphone signal. Depending upon the position in the power system, the Isolators can further be categorized into the following three types according to their placement in the power system. I've got quite a specific problem and i hope you can help
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |